RendGet started

Tools · Free, runs in your browser

SRT to VTT converter

Paste or open a subtitle file to convert it between SRT and WebVTT. You can also shift every timing, fix cues that overlap and wrap lines to a character limit, then download the new file. It runs in your browser.

or drop a file here, or paste below
Convert to

Your file stays on your device. Nothing is uploaded.

How to convert and fix a subtitle file

  1. Open your .srt or .vtt file, drop it on the box, or paste its text. The tool detects the format and converts to the other one by default.
  2. Pick SRT or WebVTT under Convert to. Pick the same format as the input if you only want to fix timings or line lengths.
  3. If the captions are early or late, type the offset in seconds. Use a negative number, such as -0.5, to make every cue appear sooner.
  4. Leave Fix overlapping cues on so no two lines show at once, and set a maximum number of characters per line if your lines run long.
  5. Check the summary for the cue count, overlaps and longest line, then download the file or copy the text.

When to use SRT and when to use VTT

Use WebVTT for anything played in a web page: the HTML video element only reads VTT, and most web players and course platforms expect it. Use SRT for desktop editors, TV and streaming deliveries, and upload pages that list it first. YouTube, Facebook, LinkedIn and Vimeo accept both, so pick whichever your editor exported and convert only when a page refuses the file.

The conversion keeps every cue’s text and timing. VTT position settings, such as line or align values written after the times, are kept when you convert VTT to VTT but dropped when you write SRT, because SRT has no place for them. NOTE, STYLE and REGION blocks are left out of the output.

Reading the validation summary

The cue count tells you whether the file parsed fully. If it is lower than you expect, look at Skipped: a block with no timing line, often caused by a missing blank line between cues, is not counted. Overlaps lists cues whose end time runs past the next start. A longest line over 42 characters is marked, since lines that long wrap on phones or get cut off by the player. Clamped means a negative shift pushed a cue before the start of the video, so its time was set to zero.

Wrapping joins each cue’s words and breaks them again at the limit without splitting a word. For vertical video, try 26 to 32 characters and keep the captions above the bottom third of the frame, where Reels, TikTok and Shorts put their own buttons. Our safe zone checker shows exactly where that is.

FAQ

What is the difference between SRT and VTT?

They hold the same thing: numbered cues with a start time, an end time and text. SRT uses a comma before the milliseconds (00:00:01,000) and numbers every cue. WebVTT starts with a WEBVTT line, uses a full stop (00:00:01.000) and can carry position settings after the times. Browsers play VTT; most editors and upload pages take either.

How do I fix subtitles that are out of sync?

If every line is early or late by the same amount, shift all timings. Enter a positive number of seconds to make them appear later or a negative one to make them appear sooner, check one line against the video, then download. If the drift grows over the video, the file was timed to a different frame rate or edit and needs retiming instead.

Why do overlapping subtitle cues matter?

When one cue ends after the next one starts, many players show both lines stacked, and some upload pages reject the file. Fixing an overlap ends the earlier cue exactly when the next one begins, so nothing is lost.

How many characters should a subtitle line have?

About 42 characters a line is a common limit for landscape video, with no more than two lines a cue. Vertical video for Reels, TikTok and Shorts reads better with shorter lines, often 20 to 32 characters, so the words stay big enough to read on a phone.

Is my subtitle file uploaded?

No. The file is read and converted by your browser. Nothing leaves your device and there is no sign-in.

Give Rend the job.

Editing is free. You pay only when Rend renders or generates something.